Made in the US. Over 10,000 customers satisfied!
Cart
0
BuildTak Bond for Polypropylene
BuildTak Bond for Polypropylene
BuildTak Bond for Polypropylene
BuildTak Bond for Polypropylene

BuildTak Bond for Polypropylene

3D printing Accessories

$24.99

Need help getting your Polypropylene prints to stick? Our new solution can do the trick! Best of all, it works with your existing Original BuildTak or BuildTak PEI sheet!

Just apply directly to your BuildTak surface of choice and heat the bed to 35℃ – 40℃ for 5 min to dry. Then print away.

Our BuildTak Bond is water soluble, so when you want to go back to another filament, just use warm water and a paper towel to remove the adhesive.

100% Secured Payment

Worldwide Shipping

Expert Support Team

30 Days Returns

Descriptions

Not all filaments are created equal and that includes polypropylene. In fact, polypropylene can be one of the more difficult filaments to print with consistently…until now!

It is now possible to print polypropylene consistently on the BuildTak Original Surface and the BuildTak PEI Surface with BuildTak Bond! 

As you do when printing with any filament, begin by adjusting the nozzle height so the first layer is perfect. You will ideally want to reach the ‘sweet spot.’ 

Printing polypropylene on BuildTak with BuildTak Bond does not require you to heat the bed at all while printing.

Apply a thin layer of ‘BuildTak Bond’ on the BuildTak Surface (as you would a glue stick) and print directly on the area you plan on printing on. 

Depending on how much you apply, you should be able to get multiple prints (our tests frequently grant us at least 2-3 uses) on a single layer of BuildTak Bond.

Additional Information

Weight .14 lbs
Dimensions 1.16 × 1.16 × 4.44 in

You may also like

variant String :: { "41895727792347":"$24.99" }